ASCO1 Members present Jennifer Miller with a wooden award for her excellent service over the past five years.
Call for Committee Members
Are you interested in contributing to the development and maintenance of valuable industry safety standards? The ASCO1 is currently looking for members in the following categories:
Call for Subject Matter Experts
The Accredited Standards Committee O1 (ASCO1) drafts, updates and maintains ANSI standards for the safety of woodworking machinery. Anyone with the interest and knowledge to contribute to this process is welcome and encouraged to participate. You need not formally join the Committee. You can participate by letting the Committee know what woodworking machines best fit your knowledge and offering to share your knowledge as an advisor or subject matter expert (SME) to the Committee.
The ASCO1 will be holding an in-person meeting on June 14-15, 2018 in Charlotte, NC. If you are interested in participating, please contact Samantha Devine at firstname.lastname@example.org
ANSI O1.1 Woodworking Machinery Safety Requirements
A revised version of the ANSI standard O1.1, entitled O1.1-2013 Woodworking Machinery Safety Requirements, has been published by ANSI. 01.1-2013 supersedes the previous version, O1.1-2009, and should be followed moving forward. As a member company of WMMA, you are entitled to receive one complimentary copy upon request. Email WMMA Associate Director Samantha Devine at email@example.com to request a copy. To purchase additional copies of O1.1-2013 Woodworking Machinery Safety Requirements visit the ANSI website at: http://webstore.ansi.org/RecordDetail.aspx?sku=ANSI+O1.1-2013.
ANSI 01.1-1 Safety Requirements for Fixed Angle Jump Saws
A revision of the ANSI standard O1.1-1, entitled 01.1-1 (2015) Safety Requirements for Fixed Angle Jump Saws, has been published and is available for purchase through the ANSI e-standard store. WMMA Members are entitled to receive one complimentary copy of the standard per company upon request. Click here if you are interested in receiving a copy of the standard.
ANSI 01.1-2 Safety Requirements for Gang Rip Saws
The ASCO1 is in the process of drafting 01.1.-2 and once complete will make the document available for public review and comment.
ANSI 01.1-3 Safety Requirements for CNC Machining Center
The ANS standard O1.1-3, entitled O1.1-3 (2014) Safety Requirements for CNC Machining Centers for the Woodworking Industry, has been approved by ANSI. The O1.1-3 standard is available for sale through ANSI at http://webstore.ansi.org/RecordDetail.aspx?sku=ANSI+O1.1-3-2014. WMMA member companies are entitled to receive one complimentary copy upon request. Email WMMA Associate Director Jennifer Miller at Jennifer@wmma.org to request a copy.
ANSI 01.1-4 Safety Requirements for Shapers
The ANSI standard O1.1-4 Safety Requirements for Shapers for the Woodworking Industry, was published on December 18, 2015. WMMA members are entitled to receive one complimentary copy per company upon request. Email Jennifer@wmma.org to request a copy. Copies can be purchased from the ANSI
ANSI 01.1-5 Safety Requirements for Straight-Line Rip Saws
The ASCO1 is in the process of drafting 01.1.-5 and once complete will make the document available for public review and comment.
ANSI O1.1-6 Safety Requirements for Edgebanders
The ASCO1 is in the process of drafting 01.1.-6 and once complete will make the document available for public review and comment.
ASCO1 Members Only Section
This is a separately passworded area for ASCO1 members. If you are currently logged in as a WMMA member, you will need to logout first, and then log in using your ASC01 password to access this area.
To volunteer for this committee, please click here.
Copyright Wood Machinery Manufacturers of America 2018
9 Newport Drive, Suite 200, Forest Hill, MD 21050 Phone (443) 640-1052 Fax (443) 640-1031 Email: firstname.lastname@example.org